Hughes 9502 BGAN M2M

 

The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications. The Hughes terminal delivers affordable, global, end-to-end IP data connectivity enabling applications in industry sectors such as environmental monitoring, SmartGrid, pipeline monitoring, compressor monitoring, well site automation, video surveillance, and out-of-band management to primary site communications.

The exceptional low power consumption (<1 W idle) of the Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid. This breakthrough provides end-to-end IP connectivity to power-challenged locations that rely upon solarbattery arrays involving sensitive power budgets.

  • Main Features
    • No connection charge with BGAN M2M (normal BGAN charge is 100 Kbytes)
    • Minimum CDRs only 1 Kbyte (normal BGAN charge is 10 Kbytes)
    • No charge over-the-air modem software upgrades
    • Exclusive airtime packages unique to the Hughes 9502
    • Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage
    • Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
    • Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
    • Ultra-low power consumption
      • Transmit: < 20 W
      • Narrow beam w/o transmit: 3 W
      • Idle (regional beam): < 1 W
      • Off (wake on packet): < 10 mW (@ 12 Vdc)
      • Off (wake on packet): < 30 mW (@ 24 Vdc)
      • Off (GPIO control): 0 W
    • Relay mode passes WAN IP address to the connected RTU
    • Security enhancements with extended layers of embedded security options
    • Basic installation; no PC required
    • Outdoor unit (ODU) can be pole mounted
    • Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
    • Built-in GPS receiv
    Interfaces 
    • Ethernet connection (RJ45)
    • USB–Type B for connection to configuration PC
    • RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
    • TNC connection on the IDU to the external antenna
    Package Contents
    • Hughes 9502 BGAN M2M Terminal IDU
    • 10 meters RF antenna cable
    • External antenna (ODU)
  • TESAM - Cobertura Inmarsat BGAN
    • Modem (IDU) strap
    • Antenna basic fixed mount kit
    • Antenna azimuth elevation bracket
    • Extended warranty options